Finding a good plumber in Singapore can be hard. If you have ever had a burst in your pipe at home or at work, you know the pain and trouble it can cause you. In such emergency cases, it will be beneficial to have a number whom you can rely on to solve all problems.

Most good drain line repair will recommend replacing a gate valve regardless of its condition. The time to discover if it will work is not during a flood in your bathroom. If you have it replaced with a ball valve then check your water heater and laundry valves, too. Have them replaced at the same time with premium ball valves. Ball valve laundry bibbs make it easy to shut off the water to the washer after each use which may help to prevent floods in the future.

After you have checked these areas, take a close look around the refrigerator, both inside and outside. Is there any usual condensation that could indicate a water leak somewhere? Is the icemaker hose fastened securely to the water line repair line? Check also for any water spots on the floor, as these are typically clear signs of a water leak somewhere.



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

Clean the hole in the gutter railing first. It must be free of any debris, so you may want to clean the entire drain channel using a proper cleaner. In this way, you will have a clean surface area which will allow you to repair the hole more easily.

The water line repair most likely damaged your electrical outlets and lighting fixtures. Have a qualified electrician come in to evaluate and repair the electrical.

People who own rental properties are great ones to give you information. With all of the service people needed for maintenance on their units, they typically know who to call and what level of work they perform. Most property owners will be more than happy to give you the information you seek. In fact, they were probably in your shoes at one time.

Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.